Our Products

Styrene butadiene rubber based screed modifier cum bonding agent and waterproofing

Application: Used for improving bonding of floor toppings, renderings and mortars; repair of worn, damaged and spalled concrete, repair of large cracks; polymer modified floor screeds; waterproof plasters for masonry and slurries.

Dosage / Consumption: Water proofing coating - BB BOND (SBR) 1 part : water0.5: cement 2 kg : sand (-300micron) 2kgs

Slurry primer: Approximately 4- 5 m2/ liter depending on substrate porosity.

Shelf Life / Packing: 12 Months /225 Kg Barrel

Integral waterproofing liquid admixture for concrete, plaster and mortars. It reduces the water demand for required workability and minimizes segregation and bleeding. To minimize permeability and increase the waterproofing properties of concrete, plaster and mortars. It confirm BIS 2645

Application: Used for low permeability concrete, water retaining wall, bathroom floors, water tanks, drains, external plastering, roof slabs etc.

Dosage / Consumption: 0.2% by wt. cement/ Cementitious

Shelf Life / Packing: 12 Months / 5 kg ,20 kg Container and 200 kg Barrel

Single component acrylic based polymer which in conjunction with cement forms a composite polymer modified cementitious waterproofing and repairing compound.

Application: It is recommended for Waterproofing of toilet, terraces, roofs, basement etc. General concrete repairs Protection of concrete against salt attack etc.

Dosage / Consumption: 1 coat on concrete with BB CARECRETE: Mix proportion: Cement -0.5 Kg/m² | BB CARECRETE: 0.25Kg/m²

Shelf Life / Packing: 12 Months / 5 kg ,20 kg Container and 200 kg Barrel To be corrected

Two component , flexible, acrylic polymer modified protective and waterproofing coating for concrete and masonry.

Application: Waterproof coating for water tank, reservoirs, toilets, balconies, utility area, swimming pools, basements, terrace , podium slabs etc.

Dosage / Consumption: 2kg / m² / 1mm Thick | Part – A 5 kg | Part – B 12.5 kg

Shelf Life / Packing: 12 Months / 17.5 Kg Box

Two component , flexible, acrylic polymer modified protective and waterproofing coating for concrete and masonry.

Application: Waterproof coating for water tank, reservoirs, toilets, balconies, utility area, swimming pools, basements, terrace, podium slabs etc. Highly flexible and elastic, can bridge shrinkage cracks.

Dosage / Consumption: 1.5 kg/m² 1mm Thick | Part –A 5 Kg | Part – B 8 Kg

Shelf Life / Packing: 12 Months / 13 kg Box

Crystalline capillary waterproofing system for cementitious substrates.

Application: Roller or brush applied waterproof coating for basements, retaining walls, foundations, reservoirs, water holding structures etc.

Dosage / Consumption: 1.5 Kg / m²

Shelf Life / Packing: 12 Months / 25 kg Bag

Integral waterproofing powder admixture based on crystalline formation to produce water tight concrete. These active chemicals react with the moisture in fresh concrete with the by- products of cement hydration to cause a catalytic reaction.

Application: Easy to use, require only mixing with concrete during concrete production, to significantly develop impermeability.

Dosage / Consumption: 0.8 % to 1.10% by wt. Of Cement / Cementitious

Shelf Life / Packing: 12 Months / 25 kg Bag